Achieve Unparalleled Peace of Mind on Your Every Journey with Effortless Windshield Protection. Discover the unmatched convenience of our self-installation process, designed exclusively for your ease and convenience. Safeguard your vehicle’s windshield with confidence, knowing that our step-by-step guide ensures a seamless and hassle-free installation experience.
- An average installation should take about 20 minutes
- We recommend having two people install the product
- When finished, let the film cure for 2 to 4 hours
- Going through a car wash is not recommended for at least 3 to 5 days after the initial installation
- Please watch the full installation video before beginning the install process
A Simple Guide to Installing Your ExoTek3™ Multi-Layer Windshield Film
Thoroughly Clean Windshield
Clean all dust and debris from the front end of the vehicle and windshield. If time allows, be sure to clean the entire vehicle as any dust or debris on the vehicle can impact the quality of the installation.
Generously apply Installation Solution on the glass, and use the provided squeegee to clean the windshield.
Apply the installation solution to the hood and place the film on the hood.
Re-Apply Solution to the windshield, Leaving No Dry Spots
Reapply the installation solution to the windshield, leaving no dry spots on the windshield.
Remove the Liner
Remove the liner from the film and then generously spray the installation solution on the films adhesive. If needed, be sure to spray more solution on the windshield if it has become dry.
Apply Film To The Windshield
With a friend, lift the film from the hood of the vehicle and place it on
Squeegee Windshield To Remove All Solution
Squeegee the center of the windshield from top to bottom. Then squeegee to remove all of the installation solution that was used during this process. Be sure to use large amounts of pressure to remove as much solution as possible. If needed, repeat the squeegee steps to be sure all solution was successfully removed.